RailRoadFan.com

Q327-31 clear EE New Buffalo 11:16 A.M. EST

Q326-31 @ 11:38 eastward reported by the DD mp CG44.2 with 480 axles & 6,522 ft. CSXT engines #427 + #440 & 117 cars.

Q326-31 clear 39 11:45

D702-31 @ 11:46 westward reported by DD mp CG44.2 w/ 96 axles & 1433 feet long. CSXT engines #2349 + #2502 & 22 cars (14 loaded + 8 empties). He has work at Harford mp CG68.7 & Coloma mp CG75.8 & Sawyer mp CG105.6 He is doing D700's work which hadn't ran yesterday.

D702-31 @ 12:07:42 westward Bangor's Center St crossing mp CG60.35

Q326-31 @ 12:20 eastward Holland Depot mp CG25.3 with CSXT engines #427 + #440 & 117 cars. He has 12 cars to set off at Waverly today.

Tom49801 wrote: ↑

Mon May 31, 2021 8:27 am

PyrodronProd wrote: ↑

Mon May 31, 2021 7:49 am

Anyone hear from D705, D706, or D708 today? Went through the Broadcastify archives for today and didn't hear anything. Wanted to make sure I didn't miss them.

I haven't heard anything for D705 nor D706 yet as of 08:25. Yesterday: D706 was posted as being at Howell at 16:33 & D705 was arriving inside of Grand Rapids at 09:00 - probably hear them a little later on today.

Thanks for the info! I heard that D706 is possibly annulled today, D705 hasn't left yet. I am currently watching D708 work Ensel Yard before departing.

D708 on duty 1030

Stopping at Webberville
Then parking train at Howell siding - possibly heading back light

Q326-31 working Waverly 13:00

Q326-31 os 112th 13:25... Everyone at every railroad crossing is pissed

PyrodronProd wrote: ↑

Mon May 31, 2021 12:58 pm

D708 on duty 1030

Stopping at Webberville
Then parking train at Howell siding - possibly heading back light

That's cool, I heard him too on the scanner. He had said he's 21 by 23 (which means he has 21 loaded cars & 23 empties for a total of 44 cars).
I know I had heard he has CSXT engine #8400, did he say he also has CSXT engine #4237?

From Romulus I just head “we will have D705 OD @15:00”.

Q326-31 @ 13:40 eastward reported by the DD mp CG19.1 with 432 axles & 5,814 ft. CSXT engines #427 + #440 & 105 cars (he had set off 12 cars in Holland).

D708 clear 77.6 1340 eastern daylight Time

D708 clear Webberville ADM 1408 eastern daylight Time
Will be dropping off 30 cars to the GLC interchange in Howell before heading back with light power

Q326 @2:10ish entered Wyoming Yard. Anyone know if they are planning to spin the power?

rc.lego.trains wrote: ↑

Mon May 31, 2021 2:12 pm

Q326 @2:10ish entered Wyoming Yard. Anyone know if they are planning to spin the power?

They normally do spin the power, that pair of engines has been going back & forth on Q326 & Q327 since May 26th & has been spun each time.

Tom49801 wrote: ↑

Mon May 31, 2021 1:04 pm

PyrodronProd wrote: ↑

Mon May 31, 2021 12:58 pm

D708 on duty 1030

Stopping at Webberville
Then parking train at Howell siding - possibly heading back light

That's cool, I heard him too on the scanner. He had said he's 21 by 23 (which means he has 21 loaded cars & 23 empties for a total of 44 cars).
I know I had heard he has CSXT engine #8400, did he say he also has CSXT engine #4237?

Current power in Lansing is 8400/4037

D702-31 @ 14:30 westward reported by DD mp CG91.9 with 80 axles & 1,116 ft. CSXT engines #2349 + #2502 & 18 cars. They're headed to Arlington Metals in Sawyer mp CG105.6

D708 clear Howell heading back West with light power 1453 eastern daylight Time

D702-31 @ 15:56 on the move eastward at the east end of Sawyer mp CG104.6 with CSXT engines #2502 + #2349 & about 14 cars. Many thanks again to K1NGxBONDx007 for being out there track side & reporting

D801-31 @ 16:08 westward entirely cleared the Holland Depot mp CG25.3 with CSXT engines #7010 + #530 & BNSF engines #6178 + #5619 &130 empty coal cars. He'll go into Grand Junction mp CG54.

D702-31 @ 16:13 eastward reported by DD mp CG91.9 with 80 axles & 1,129 ft. CSXT engines #2502 + #2349 & 18 cars.

Did D705 run?

708 tied up in Ensel yard 1550 eastern daylight Time