CSX Train Location Updates October 2019

[dave989]

Q329 west at Breton 11:15.

Met Y106 at Seymour

[Tom49801]

N800-16 at Bangor mp CG60.7 @ 11:15:05am with BNSF engines #6010 + #9318 & 128 coal cars. Will be getting pushers (D801) added at Wells siding mp CG43.3 & the D801 crew was told to run N800 & the original crew (running out of time) will just ride the train since no cabs are available.
Q327 reported by the DD mp CG19.1 @ 17:49 with 254 axles & 3,562 feet long. CSX engine #3040 & 62 cars. Q327 is diverging into Waverly/Holland mp CG23.
Q327 on the move again and had reported from mp CG28 @ 18:39
E800-16 at Bangor mp CG60.7 @ 18:46:57 with BNSF engines #5965 + #5693 & 130 empty coal cars.
Q327 Bangor approach @ 19:33:45 with CSX engine #3040 & 61 cars. He had dropped off 1 car in Holland tonight.
E800-16 cleared the St Joe Bridge @ 19:39
Q327 cleared the St Joe Bridge @ 20:31
Amtrak P370 Bangor mp CG60.7 approach @ 22:10:40

[GP30M4216]

Q327 Bangor approach @ 19:33:45 with CSX engine #3040 & 61 cars. He had dropped off 1 car in Holland tonight.

Q327 seems to drop off car(s) in Holland every night. Is D700 not handling Holland-bound cars and just working mainline industries Grandville - Arlington Metals?

[trnwatcher]

Q327 Bangor approach @ 19:33:45 with CSX engine #3040 & 61 cars. He had dropped off 1 car in Holland tonight.

Q327 seems to drop off car(s) in Holland every night. Is D700 not handling Holland-bound cars and just working mainline industries Grandville - Arlington Metals?

Yep. Talk is they might give Buzzi Cement in Grandville to Y106 to take more work from D700.

[Tom49801]

N801-16 at Bangor mp CG60.7 @ 05:29:47 with BNSF engine #9152 + 1
Q326 with CSX #257 leading @ 08:55 is stopped on or near the St Joe Bridge to inspect his train (55th car). The DD must have actuated, since, in the radio conversation the engineer had said they would only be able to move at 10mph if a defect is found.
D700 @ 9:05am reported from Kirk siding mp CG70.2 saying they will be heading east with work in Holland. D700 was tied down in Sawyer yesterday mp CG104.6

[Tlout]

BNSF 9152, 9253 north at Riley St. Holland 9:17 AM. No pushers.

[SD80MAC]

Q327 Bangor approach @ 19:33:45 with CSX engine #3040 & 61 cars. He had dropped off 1 car in Holland tonight.

Q327 seems to drop off car(s) in Holland every night. Is D700 not handling Holland-bound cars and just working mainline industries Grandville - Arlington Metals?

More often than not, 700 runs out of time since they go long every day. Q327 and Q326 generally have enough time to work Holland anymore.

[Tom49801]

Q326 @ 09:34 reported no warm axles were found & they will proceed at 10mph to a switch at mp CG84.3 & remove that car from their train.
D700 Bangor mp CG60.7 eastward approach @ 09:54:43 with CSX engine #4019 & 24 cars.
Q326 @ 10:32am is in the process of dropping off his bad car.

[CantBeShook.WeHot]

q32617 Benton harbor MI. q32716 arrived Chicago 2am. q32717 set for 5pm grand rapids. q32817 arrived Detroit 8am. q32917 ensel lansing.
d70016 zeeland MI. d70716 arrived lansing 3am. d70817 set for noon lansing.
n80017, n80018, e80017 in system.
q15017 on duty north Baltimore. q15117 Plymouth MI. q50817 sd cabin OH. q50917 Pemberville OH. q13116 avon IN. q13216 not on duty IL. q38616 arrived Detroit 7am. q38717 walbridge.

[Tom49801]

Q326 with CSX engine #257 leading @ 11:37am reported he is departing the siding at mp CG84.3 after dropping off the car that had actuated the HBD at mp 91.9
Q326 Bangor approach mp CG60.78 @ 12:34:03 with CSX engines #257 + #3328 & 91 cars. Saw Rock Island RR, Soo Line, Sands of Iowa(?), & Delaware Hudson CH's.
Q329 was reported by the DD mp CH126.3 @ 12:53pm with 628 axles & 9,683 feet long. Could be 2 engines & 154 cars for the axle math. CSX #335 is leading.

[SD80MAC]

Q329 west at Fox with 335 leading 835 and 9600 ft of train. Ran around Y106 in the siding who has 2011 and 5 cars.

[Tom49801]

Q327 reported by the DD at mp CG19.1 @ 19:04 with CSX engines #335 + #835 & 74 cars. He is diverging into Waverly/Holland at mp CG23.
Q327 is on the roll again & reported from mp CG28 @ 19:58
N800-17 cleared the St Joe Bridge @ 20:31 with BNSF engine #5722 + #6111 & 130 loaded coal cars. Dispatched advised N800-17 he will diverge into Kirk siding mp CG72.3 to allow Q327 & Amtrak to pass.
Q327 Bangor mp CG60.7 approach @ 20:50:05 with CSX engines #335 + #835 # 66 cars. He is meeting N800-17 at Kirk siding & will then continue westward.

[Jochs]

P370-17 is currently going through Benton Harbor.

[Jochs]

Q327-17 is currently at Hilltop Rd.. Sounds like CSXT 353 leading.

[Tom49801]

Q327 with CSX engines #335 + #835 # 66 cars cleared the St Joe Bridge @ 21:51
Amtrak with engine #4626 arrived Bangor mp CG60.7 @ 22:02:28 N800-17 should be departing Kirk siding mp CG70.2 to follow Amtrak.
​N800-17 Bangor mp CG60.7 approach @ 22:22:15 with BNSF engine #5722 + #6111 & 130 loaded coal cars. He will go to Grand Junction siding mp CG55.6 & a cab will pick up the crew.

[Tom49801]

D700 westward at Bangor mp CG60.7 @ 02:37:03 with CSX #4019 & 20 cars.
E800-17 at Bangor @ 05:37:52 with 2 BNSF engines & 130 empty coal cars.
Amtrak P371 with engine #4626 at Bangor @ 05:37:52
D700 reported eastward from mp CG78 @ 08:06 & Q326 is following him.
D700 eastward at Bangor @ 08:34:00 with CSX engine #4019 & 19 cars.
Q326 at Bangor @ 08:51:38 with CSX engines #741 + #3463 & 95 cars.

[GP30M4216]

Q326 with CSXT 741 leading and 95 cars clear Zeeland at 10:00.

[SD80MAC]

Q329 rolling into Wyoming yard now with CSX 869 and 8400 with another big train.

[~Z~]

Y106 working out near Alto MI as of 1:50pm.

[SD80MAC]

Y106 west with CSX 2011 at Breton 14:51.